PREPLINE PSPS40, User'S & Technical Manual

Page: 22 / 24

PSPS40 / PSPT40 . 20 .
disPSPT40ays current weight.
9. If there’s an error occurred in calibration, the scale will disPSPT40ay CAL.ERR; It usually means incorrect data input
or loading weight, and PSPT40ease try to return back to the last step to disposal.
10. Once the calibration switch is changed to OFF; the scale will exit the calibration mode.
17.
17. 17.
17. The meaning of some dis
The meaning of some dis The meaning of some dis
The meaning of some disPSPT40
PSPT40 PSPT40
PSPT40ayed symbols
ayed symbols ayed symbols
ayed symbols
-------- -------- -------- --------Weight signal is too large
------- ------- ------- -------No proper data can be disPSPT40ayed
-------
------- -------
-------Weight signal is too small
-------- -------- -------- --------Zero point is over the setting range
-------- -------- -------- --------Zero point is below the setting range
--------
-------- --------
--------Error in unit key operation
--------The setting parameter(s) is not in normal range
-------- -------- -------- --------There is an error in calibration
--------
-------- --------
--------ADC is over max. range
--------
-------- --------
--------Capacity
-------- -------- -------- --------Voltage
------ ------ ------ ------To set and store the indirect unit price
--------
-------- --------
--------PSPT40U address
-------- -------- -------- --------Weighing unit selecting
------ ------ ------ ------Recall PSPT40U
-----
----- -----
-----To unload the weight
-------- -------- -------- --------To load the weight
-------- -------- -------- --------To input load weight
------
------ ------
------Calibration enable switch is ON
-----
----- -----
-----Calibration enable switch is OFF