PSPS40 / PSPT40
.
7
.
4.
4.
4.
4.
OPERATIONS
OPERATIONS
OPERATIONS
OPERATIONS
Normal Weighing Mode
Normal Weighing Mode
Normal Weighing Mode
Normal Weighing Mode
1.
Place the scale on a flat, stable surface. Level the scale using the leveling bubble at the lower left side of the display.
2.
With the weighing platter empty, turn on power switch (located underneath on the right-hand side of the scale). Due
to the high resolution of this scale, allow 10 minutes for the scale to warm up before use for optimum results.
3.
Press the ON/OFF key to power on the scale. The self-check will run and the scale will display a zero reading. The
scale is now ready for weighing.
Note: If the scale does not zero, an error code will be displayed. See Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting to resolve.
4.
To change the weighing unit of measure, press the Unit key to toggle between kg, lb or oz.
5.
Set the tare weight if desired.
6.
Place objects on the scale platter and read the weight on the indicator.
7.
When finished weighing, press the ON/OFF key for 4 seconds to power off the scale.
ZERO function
ZERO function
ZERO function
ZERO function
1. Under the normal weighing mode, press Zero key to set the scale to zero point when the scale reading is stable
(the
weighing unit light without shining).
2. When under the tare mode, ZERO key is invalid.
Note: If the scale cannot be zeroed, an error code will be displayed. See Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting to resolve.
Setting the Tare
Setting the Tare
Setting the Tare
Setting the Tare Weight
Weight
Weight
Weight
This scale allows for both a manually entered pre-set tare weight, as well as a “weighed” tare weight.
1.
1.
1.
1.
To enter a weighed tare:
To enter a weighed tare:
To enter a weighed tare:
To enter a weighed tare:
a.
Place an empty container on the platter and press the Tare key. The display will return to zero, eliminating
the weight of the container. The Zero
Zero
Zero
Zero light will go off and the Tare
Tare
Tare
Tare light will be lit.
Note
Note
Note
Note: The gross weight must be positive to enter a weighed tare.
b.
To clear the weighed tare, remove all weight from the scale. The display will show a negative weight. Press
the TARE key to return the display to zero, eliminating the weight of the container. The Tare
Tare
Tare
Tare light will go off
and the Zero
Zero
Zero
Zero light will be lit.
2.
2.
2.
2.
To
To
To
To manually enter a known tare:
manually enter a known tare:
manually enter a known tare:
manually enter a known tare:
a.
Use the number keys to input the tare weight. Your entry will be displayed in the “WEIGHT” display window.
Then press the Tare key to confirm or press the ON/OFF key to exit and not confirm.
Example
Example
Example
Example: With the platter empty, entering 100g and pressing the Tare key will display ““““
” kg.
b.
To recall the previously stored tare weight, press the RC.PLU key. Press the ON/OFF key to return to
weighing.
Note
Note
Note
Note: The previously stored tare weight can only be recalled with the RC.PLU key when in tare setting
mode.
c.
To clear the manually entered tare weight, (enter “0” and) press the Tare key to confirm.
d.
If unit price is in un-saved mode, the tare weight and unit price will be auto cleared after transaction and
objects being moved.
