PSPS40 / PSPT40
.
11
.
8.
8.
8.
8.
The details about RS232 communication
The details about RS232 communication
The details about RS232 communication
The details about RS232 communication
1. Under the normal working mode, press and hold ON/OFF key and 4 key at the same time until the WEIGHT window
shows “SETUP” . Under this mode, you can set the RS232 baud rate, data format and communication format.
2. After entering into this mode, the weight window will show “Setup”, the UNIT PRICE window will show “232.oUt”
(RS232 output
content format) and the TOTAL PRICE window shows one of following content:
2.1 HOST
HOST
HOST
HOST (PSPS40/PL-xxxx is connected with host device, e.g. a PC)
2.2 P
PP
Prtd
rtd
rtd
rtd40
40
40
40 (PSPS40/PSPT40-xxxx is connected with the OS-2130D, label dimension is 58mm × 40mm, date will be
printed on label)
2.3 P
PP
Prtd
rtd
rtd
rtd60
60
60
60 (PSPS40/PSPT40-xxxx is connected with the OS-2130D, label dimension is 58mm × 60mm, date will be
printed on label)
2.4 P
PP
PrtNd
rtNd
rtNd
rtNd4
4
4
4 (PSPS40/PSPT40-xxxx is connected with OS-2130D, label dimension is 58mm × 40mm, no date will be
printed on label)
2.5 P
PP
Prt
rt
rt
rtNd6
Nd6
Nd6
Nd6 (PSPS40/PSPT40-xxxx is connected with the 2130D, label dimension is 58mm × 60mm, no date will be
printed on label)
Use numerical keys 0,1,2,3,4
0,1,2,3,4
0,1,2,3,4
0,1,2,3,4 to choose RS232 output content format (0-HOST, 1- P
PP
Prtd
rtd
rtd
rtd40
40
40
40, 2- P
PP
Prtd
rtd
rtd
rtd60
60
60
60, 3- P
PP
PrtNd
rtNd
rtNd
rtNd4
44
4,
4- P
PP
Prt
rt
rt
rtNd6
Nd6
Nd6
Nd6), use ENTER key for confirmation to go to the next step, or ON/OFF key to exit this mode.
3. Then, the WEIGHT window will show “Setup”, the UNIT PRICE window will show “232.bPS” (RS232 band rate: bit per
second) and TOTAL PRICE window shows baud rate xxxxx. Use numerical keys 1,2,3,4,5 to choose RS232 baud rate:
1--1200bps
2--2400bps
3--4800bps
4--9600bps
5--19200bps
Press Enter key for confirmation to go to the next step, or ON/OFF key to exit this mode.
4. Then, the weight window will disPSPT40ay “232.dFt” (data format), the total price window will disPSPT40ay data
format xxx. Use 1, 2, 3 key to select data format:
1—8N1 8 bits data, no odd or even , 1 start bit, 1stop bit
2—7O1 7 bits data, 1 even , 1 start bit, 1stop bit
3—7E1 7 bits data, 1 odd, 1 start bit, 1stop bit,
Press Enter key to confirm the input and go to the next step, or use ON/OFF key to exit this mode.
5. Then, the WEIGHT window will disPSPT40ay “Prtd.dt” (OS-2130D print date format), the TOTAL PRICE window will
disPSPT40ay data format xxx. Use 0, 1, 2 key to select data format:
0—CANADA Candadian format: YY MM DD
1—USA USA format: DD-MMM-YY
2—Numerical Numerical format
Press Enter key to confirm the input and go to the next step, or use ON/OFF key to exit this mode.
6. Then, the UNIT PRICE window shows “USb.oUt” (USB output content format) and the TOTAL PRICE window shows
HOST (the scale is connected with host device, e.g. a PC), use ENTER key for confirmation to go to the next step, or
ON/OFF key to exit this mode.
7. Then, the WEIGHT window will show “SETUP”, the UNIT PRICE window will show “USb.bPS” (USB band rate: bit per
second) and TOTAL PRICE window shows baud rate xxxxx. Use numerical keys 1,2,3,4,5
1,2,3,4,5
1,2,3,4,5
1,2,3,4,5 to choose RS232 baud rate:
