mixture and clockwise to turn it off.
Note
: To minimize heat loss, close the air control valve when your hot tub is
not in use.
6. Continue
pressing
until Pump 1 slows.
Note
: When programmed for
continuous (12x2)
filtration and when
temperature limits allow, Pump 1 and the ozone generator run continuously
to help keep your water clean.
7. Press the Pump 2 button
(if equipped). You should hear the second
pump (fixed-speed) turn on, see water circulating in the hot tub, and see the
icon swirl on the display.
8. Press
again. You should hear the second pump turn on a higher
speed and see the icon swirl faster. If Pump 2 has not primed after 2
minutes repeat same priming procedure of step 3 above for Pump 1. Check
and adjust the water and airflow of every jet from Pump 2 if necessary.
9. Press
a third time to turn off Pump 2. A built-in timer automatically
turns Pump 2 off after 20 minutes, unless you turn it off first.
10. Press the Pump 3 button
(if equipped). You should hear the second
VST pump turn on, see water circulating in the hot tub, and see the icon
swirl on the display.
If Pump 3 has not primed after 2 minutes repeat same priming procedure of
step 3 above for Pump 1. Check and adjust the water and airflow of every jet
from Pump 3 if necessary.
Note
: Repeatedly pressing the button raises the speed each time (40%,
60%, 100%, and OFF).
11. Continue pressing
until Pump 3 turns off. A built-in timer
automatically turns Pump 3 off after 20 minutes, unless you turn it off first.
12. Press the Light button
to turn the light on. Press this button again to
cycle through the many available colors. Once a desired color is found,
pressing this button again stays on this color.
13. Press
again to turn the light off. A built-in timer automatically turns
the light off after two hours, unless you turn it off first.
14. Press the Blower button
to turn on the air blower (if equipped).
Check that air goes to the air jets on the bottom of each seat.
15. Press the Blower button again to turn the Blower off. A built-in timer
automatically turns the Blower off after 20 minutes.
Page 26
For HELP, call 727.573.9611
Summary of Contents for Sterling Leisure
