Premisys ALR 28+14, Reference Manual

Page: 24 / 34

1-14 Alarm Cards
Model No.
Running Head
Alarm Card User Screens and Settings Alarm Cards
Table 1-3. ALR 28+14 Alarm Sensor Screen Actions
Table 1-4. ALR 28+14 Alarm Sensor Option Settings and Defaults
SENSOR NAME
A user input field of up to six (6) characters to identify the specific alarm. Note that the sensor
name is a local identifier, and is not transmitted with alarm conditions.
TRIG ON
The Trigger On parameter defines if the sensor should report an external alarm upon sensing
the opening (open) or the closure (close) of the contact to which it is connected. The default
value is close.
STATUS
This value indicates what action should be taken in the event of an alarm for each individual
sensor. This variable may be set to log the alarm in the alarm register, or to report the alarm.
Reported alarms are also logged by the system. The default value is ignore.
Action Function
Refresh Redraws the screen.
dEfault Returns all settings to the default state.
pgUp Returns to the previous screen page.
pgDn Goes to the next screen page.
sWitches Displays the Alarm Switch Screen.
Voice Displays the Voice Screen.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter User Options Default
# [Alarm Sensor number 1-28] fixed
SENSOR NAME [user-input sensor name] blank
TRIG ON close open close
STATUS ignore log report ignore
ALARM TYPE info minor major crit minor
BUZZER off on off