background image

13

C

ALL

H

ANDLER

6000 I

NSTALLATION

I

NSTRUCTIONS

Warranty & FCC Information

Warranty:

Upon receipt, manufacturer will repair or replace, at its option, for a
period of three years from the date of purchase, any system that proves
defective in materials or workmanship. The manufacturer is not liable for
indirect, incidental, or consequential damages in connection with the use
of this product. This limited warranty does not include labor for installation
or removal of the unit, or shipment to Premier Technologies, Inc. This war-
ranty is null and void if the label containing the serial number is removed.

FCC PART 15 Class A Information:

This equipment uses and generates radio frequency energy. It has been
tested and found to be in compliance with the limits for a Class A computing
device in accordance with the specifications in Subpart A, Part 15 of the
FCC rules. These limits are designed to prevent interference with radio
and television reception in a commercial installation.
This product has passed Fcc testing. However, if it is not installed and
used properly, you may notice radio and television interference. You can
minimize the chance of interference by carefully reading this manual and
following the instructions for installation and operation of the unit.

If you have installed and are using this product properly and notice
interference, you should verify the source of the interference by turning the
suspected source of interference on and off. If this product is determined to
be the cause of the interference, you are encouraged to try and correct the
interference by the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between this product and the receiver.
• Connect this product to an outlet which is on a different branch      

circuit than the receiver.

If none of the above items correct the interference, contact an experienced
radio or TV technician or your dealer for assistance.

Summary of Contents for CH 6000














Reviews: