Installation
Instructions
Page
5
Mounting the Brackets to the Display
Step 1.
Align the mounting bracket holes up with the mounting holes on the back of the display. There are two mounting holes used on
each side of the display.
Step 2.
Place the split washer between the display and the mounting bracket.
Step 3.
Insert the M16 mounting bolt through the mounting bracket then through the split washer into the display.
Step 4.
Tighten the bolt into place and repeat the steps for the remaining three bolts.
The following steps will require a minimum of 3 people. This should not be done with less then 3 people due to the
weight of mounting brackets.
Right Mounting
Bracket
Left Mounting
Bracket
Split Washer
M16 Bolt
DO NOT OVERTIGHTEN THE M16 BOLTS. DOING SO MAY RESULT IN DAMAGE TO
THE DISPLAY. TIGHTEN TO MANUFACTURERS SPECIFICATIONS.
SCM-103
