Page 10
Installation Instructions
THE SCM-103 IS HEAVY. IT IS STRONGLY RECOMMENDED THAT THREE PEOPLE PERFORM ALL
INSTALLATION STEPS.
Step 5.
Route the cable down through the provided holes
on the display mounting bracket.
6-32 x 1/4”
Set Screw
Step 3.
Slide plastic insert plug down cabling and
insert into the top of the mounting bracket. A cut
out in the mounting bracket is provided that will
allow the plastic cap to sit flush with the top of
the mounting bracket
Step 4.
Locate the 6-32 x 1/4” Set Screw and insert
into the sides of the plastic top locking the plastic
plug into position. The set screw location is on
the side of each plastic top. Tighten the set screw
using 1/16” Allen wrench.
Cable Routing Holes
SCM-103
Plastic Top
