Installation
Instructions
Page
7
Mount Installation
The installation instructions that are contained in this manual refer only to the RTM-L. The installation instructions
for the various bases that are used with the RTM-L will be included with those products.
Prior to installing the RTM-L, the mounting configuration must already be assembled (base, support poles, etc.).
Mounting
Block
Cradle
Support
Poles
1.
Slide the mounting
block over and down
the support poles.
Set Screws
2.
To secure the mounting block to the support poles, tighten the
four set screws (located on each side of the mounting block),
using the 5/32” Allen wrench (supplied).
RTM-L