CF1126 CEDAR LOG CHAIR
or
CF1148 LOVE SEAT
Please check contents before assembly.
If any items are missing or damaged,
do not take the unit back
to the store.
Call 1-800-427-5136 for customer service and we will save you time by correcting any prob-
lems directly for you.
NOTE:
Read all instructions before starting.
The two differences between the chair and the love seat are
the length of the seat and back.
Do not completely tighten any screws until the unit is fully
assembled and setting on a level surface.
Use a rubber mallet (or a block of wood between the ham-
mer and the unit) to drive doweled ends into holes as far as
possible.
LOG CHAIR & LOVE SEAT COMPONENTS
LOG CHAIR & LOVE SEAT HARDWARE
(Shown smaller than actual size)
NOTE:
Cracks or Checks in logs are part of the
natural beauty of cedar logs and should not be
considered defects.
TOOLS REQUIRED
Lay assembled seat on floor. Insert dowel
end of uprights on assembled back into holes
on the back seat rail, ad-
just uprights in or out as
needed to align properly.
Do not tap on seat back
with hammer.
To keep the seat rail from splitting, lay the back on
the floor and drive the seat onto the dowelled ends
by hitting on the bottom of the seat assembly.
STEP 1
7/16” socket or
wrench
Optional
power drill
Fourteen 2 1/2” screws
TIPS
A battery operated or electric drill will make
assembly faster and easier.
Use a good quality penetrating oil or wood deck
sealer with a UV inhibitor & an anti-fungal.
(Make sure product is intended for outdoor use.)
If staining or finishing before assembling, tape
off all dowel ends. (Finishes will cause the dow-
els to swell, making assembly difficult.
Tap uprights in or out until dowel drops into hole.
Uprights
