Display Orientation
The RTM-L will allow the user to adjust the display a full 360°.
Page 10
Installation Instructions
BEFORE ROTATING THE RTM-L, MAKE SURE THAT THE M6 KNURL KNOB IS SECURELY FASTENED
TO THE RTM-L. ALSO, PLEASE MAKE SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE
FOR FULL ROTATION.
1.
To adjust the RTM-L, rotate the
display either clockwise or
counter-clockwise.
2.
Tighten the two Phillips
head locking screws.
Tilt Positioning
1.
Once the position has been locked down, use an Allen wrench to take off the crank handle.
2.
Once the crank handle has been removed, re-attach the crank handle, but in the opposite direction from
what it was. This is the storage position for the handle.
The RTM-L has the ability to tilt 10° down.
The RTM-L has the ability to tilt 35° up
Rotate the crank handle to tilt the
RTM-L:
Down - Clockwise
Up - Counter-Clockwise
RTM-L
The RTM-L is shipped with the hand crank in the storage position. The hand crank must be removed in order for the
RTM-L to be adjusted. After the adjustments have been made, return the hand crank to the storage position. If the hand
crank is not returned to the storage position, it may cause damage to the unit or other equipment. Please return the hand
crank to the storage position after operation.
