PSD-BW/L
Installation Instructions
Page - 6 -
PSD-SPA Installation (Figure 3)
Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA.
The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA.
1. Slide the PSD-SPA over and down the support tubes.
2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied)
to secure the PSD-SPA (Figure 3).
Figure 3
PSD-BW/L Nesting Cart Storage (Figure 4)
The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as
possible.
Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L
Nesting Cart will be used with.
Figure 4
5/32” Allen Wrench
Support Tubes
Support Tubes
PSD-SPA
