manualshive.com logo in svg

Premier Mounts PDS-PLUS, Installation Instructions Manual

Share
Download
Premier Mounts PDS-PLUS Installation Instructions Manual Download Page 4

PDS-PLUS/PDS-PLUS-W

Page 4 

Visit the Premier Mounts website at http://www.mounts.com

 

Installation Instructions

Features

Knurl Knobs 

Provide quick and simple 

tooless adjustments

Direct Mounting Slots

Enable mount to be fastened 

directly to structural surface

Mounting Slots

Allows you to choose from a 

variety of mounting options 

and projector mounting point 

configurations

Adjustable Leveling Barrels 

You can quickly level the mounting legs 

without any specialized tools

Mounting Legs

Combined with the numerous 

projector plate mounting slots, the 

mounting legs allow for near infinite 

mount configurations

Congratulations on the purchase of your new Premier Mounts PDS-PLUS/PDS-PLUS-W Versatile Projector Mount. The 

PDS-PLUS works together with our exciting new PDS Base Box. The PDS-PLUS/PDS-PLUS-W has multiple mounting 

configurations to fit a variety of projectors. The PDS-PLUS/PDS-PLUS-W is truly the most VERSATILE projector mount 

on the market today.

Low Profile

At less than 2˝, the PDS Series 

is one of the lowest profile 

mounts on the market

Security Leveling Barrel 

Allows the user to easily secure the mount 

with a padlock or a steel-cable locking system 

(PCB-CSL1). The locks (sold separately) 

would make it nearly impossible for anyone to 

remove the projector from the mount.

Summary of Contents for PDS-PLUS

















Reviews:

No comments

Brands by name

Popular brands

Load more brands