Installation
Instructions
Page
9
Base Installation
The following steps direct you only on how to attach the lift to a pre-existing mounting surface. These directions will
proceed on the assumption that you have already selected your mounting surface (i.e. furniture enclosure, plywood
base, concrete fl oor, etc.). Unpack the
L180F
and familiarize yourself with the components. Please take time before you
install the
L180F
to determine the location of where the
L180F
will be mounted. Please familiarize yourself with all
components contained herein.
Step 1.
Place the steel fl oor board on the mounting surface inside the cabinet, making sure that the steel fl oor board is centered
right to left and positioned against the front inside wall of the cabinet.
Step 2.
Locate the nine (9) mounting holes that are on the steel fl oor board.
Step 3.
Using nine (9) #10 x 3/4” wood screws (supplied) and a portable drill, attach the steel fl oor board to the mounting surface.
All wiring must be completed prior to performing the following steps.
Steel Floor Board
Steel Floor Board
#10 x 3/4” Wood Screw
Drill
L180F
If mounting to concrete, please use commercially available concrete anchors.
