background image

Page 18 

                        Installation Instructions

Warranty

PREMIER MOUNTS

LIMITED WARRANTY

This Warranty covers the following products:

L180/L360 Series Flat Panel Motorized Safety Lift Systems
What and Who is Covered by this Limited Warranty and for How Long

Premier Mounts warrants this product to be free from defects in material and workmanship. All metal parts and 

assemblies are covered for the life of the original owner. Electro-mechanical components are covered for three 

(3) years from the date of purchase.
What Premier Mounts Will Do

At the sole option of Premier Mounts, we will repair or replace, free of charge, any product or component covered 

by this Warranty if we determine that it is defective in materials or workmanship.
What is Not Covered; Limitations

PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO CABINETS, MOUNTS, ADAPT-

ERS,  DISPLAYS,  PROJECTORS  OR  OTHER  PROPERTY,  OR  PERSONAL  INJURY,  RESULTING  IN 

WHOLE OR IN PART FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS 

PRODUCTS.

PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, IN-

CLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR RE-

MOVING AND REPLACING DEFECTIVE PRODUCTS, COMPONENTS OR PARTS. SOME STATES DO 

NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 

SO THIS LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Limited Warranty Service

If you wish to obtain warranty service please write to us at the address below. You must include proof of pur-

chase (e.g. an original sales receipt) and a description of the defect, the purchaser’s name, address, and telephone 

number.

 

Premier Mounts

 

Attn: Warranty Claim

  

1321 S. State Collge Blvd.

  

Fullerton, CA 92831

General inquiries can be addressed to Premier Mounts Customer Service at 1-800-368-9700.

State Law

THIS  WARRANTY  GIVES  YOU  SPECIFIC  LEGAL  RIGHTS.  AND  YOU  MAY  ALSO  HAVE  OTHER 

RIGHTS WHICH VARY FROM STATE TO STATE.

L180F

NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THIS WAR-

RANTY, THIS WARRANTY IS LIMITED TO FIVE YEARS FROM THE DATE 

OF PURCHASE IN THE EVENT THAT THE WARRANTED PRODUCT IS 

COMMERCIALLY RENTED OUT.

Electrical products and components, such as amplifiers, speakers, motors, switches 

remote controls and related electrical items, are backed by a 3-year warranty.

Summary of Contents for L180F



















Reviews: