background image

Page 8  

 

 

 

 

 

 

 

 

       

        Installation Instructions

Lift Base Installation

The lift assembly comes pre-assembled.

Step 1. 

Locate the six (6) mounting points that 

 

are located on the lift base (three on each 

 side).

Step 2. 

Determine where the six (6) mounting points are

 

for the single base installation (see page 5). 

Step 3.

  Place the lift base over the mounting points and 

 

line up the holes.

Steel Floor Board

Lift Base

Step 4. 

Attach the lift base to the steel floor board using 

 

six (6) M6 x 12 Phillips head screws (three on 

 each 

side).

Lift Base

Steel Floor 
Base

Mounting Points

Support Bracket Installation

Step 1. 

Slide the support bracket down the lift 

 

column about 3” from the top of the outer

 lift 

tube.

Step 2

.  Use two (2) #8 x 1/2” Phillips head wood 

 

screws to attach the support bracket to the 

 

rear of the cabinet.

Step 3. 

Insert and tighten two (2) M8 x 35 

 

Phillips head screws (one on each side) on 

 

the back of the support bracket. Thread 

 

these screws all the way in.

Wood Screw 
Mounting Point

Support
Bracket

Lift 
Column

M8 x 35mm 
Screw

Tightening the screws will force the tabs 
against the lift. Screw all the way in.

L180F

Summary of Contents for L180F



















Reviews: