Page 14
Installation Instructions
Attaching Floating Lid Bracket
Step 1.
Line up the track with the track receiver.
Step 2.
Gently lower the floating lid track down
into the track receiver.
Floating
Lid
Track
Track
Receiver
Securing the Display
Once the brackets have been placed over the upper mounting rail on the mounting back plate, use a screwdriver to tighten the two bracket
security screws. This will secure the display to the mounting back plate and will also prevent any lateral shift (see
NOTE
:) movement.
The lateral shift adjustment allows
the user to center the display on the
mount. Once the display is attached,
slide the assembly left or right to cen-
ter the display.
Bracket Security Screw
Phillips Screwdriver
Mounting Back Plate
Display
Floating lid should be at least 1/4” above
the display.
L180F
