Installation Guide
ECM-D70T / ECM-D70T1.5
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Route cables through the cable access holes and to their respective
locations.
The cables must then be routed through the coupler, up the ceiling
adapter (not included) and into the ceiling to a pre-determined source.
Source or
A/V Cable
To Ceiling
Ceiling Adapter
Coupler
Decorative
Cover
Mounting
Bracket
Arm
When attaching the decorative covers, verify the direction of the
covers. The smaller mounting hole should be in position above the
larger mounting hole.
M4 x 8mm Screw
Screwdriver
Do not over tighten these screws.
1) Place the first decorative cover over the first mounting bracket
arm and push firmly into place.
2) Repeat Step 1 for the second decorative cover and mounting
bracket arm.
1) Align the mounting holes.
2) On each decorative cover, insert and tighten an M4 x 8mm
screw in the smaller mounting hole.
3) Repeat the Attaching Decorative Covers instructions to attach
decorative covers to the second flat-panel.
The decorative covers should easily go over the M6 x 25mm
screw.
6
7
8
Attaching Decorative Covers
Page 8
