Installation Guide
ECM-D70T / ECM-D70T1.5
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
1
2
Attaching the ECM-D70T to the Ceiling
ECM-D70T
Minimum four (4) complete turns
NPT Pipe
(not included)
Phillips Screw
Phillips Screw
NPT Threaded
Coupler
NPT Pipe (not
included)
Screwdriver
A 1 1/2” or 2” NPT threaded pipe must be firmly secured to
the ceiling structure before performing the following steps.
The Phillips set screw must be backed out in order for the
NPT threaded pipe to attach to the threaded coupler.
The coupler must be threaded onto the NPT threaded pipe
a minimum of four (4) complete turns.
Ensure that all connections are secure and tight before
proceeding to the next step.
1) Align the ECM-D70T thread coupler with the threaded
end of the NPT threaded pipe.
2) Thread the ECM-D70T onto the NPT threaded pipe and
rotate the ECM-D70T coupler clockwise until the coupler
is fully threaded onto the NPT threaded pipe.
Once the ECM-D70T has been firmly threaded to the 1 1/2”
or 2” NPT threaded pipe, use a screwdriver to tighten the
Phillips screw on the thread coupler.
Page 4
