User Guide
P.5
•
To
arm
the Starter Kill in Active or Passive Mode, press and hold the
LOCK
button on the
transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this will also
lock the doors). In Passive Mode, the Starter Kill will automatically re-arm 1 or 3 minutes after
the doors were unlocked unless the ignition key has meanwhile been inserted in the ignition
switch (if Key Sense is installed – see p. 7).
Installer-programmable Options
The system was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Note:
The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation.
The installer-programmable options are as follows:
•
Remote Door Locks
•
Safe Start
•
Starter Kill / Anti-grind feature
•
Passive / active arming of the Starter Kill
•
Idle Mode
•
Ignition-controlled Door Locks
•
Smart Ignition Locks
•
Secure Lock
•
Priority Door Access
•
Remote Trunk Release
•
Horn Confirmation (Panic Mode)
•
Engine Run Time
•
Key Sense
•
AUX 1
,
AUX 2
and
AUX 3
outputs
•
Multi-car Operation
Remote Door Locks Option
If your system was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry. See p. 4 for operation details.
Flashing LED
The user may decide to turn on or off LED flashing at any moment. To do so, simultaneously press
the
TRUNK
and
LOCK
buttons on the transmitter:
•
Flashing LED
ON
:
the L.E.D. will flash at all times (either under active arming or under passive
arming) to indicate that the Starter Kill is active.
•
Active Arming:
the LED will flash normally.
•
Passive Arming:
the LED will flash at a faster rate during the countdown preceding the
activation of the Starter Kill. Once the Remote Car Starter
is armed, the LED will flash at a slower rate.
•
In Valet Mode:
the LED will remain lit without flashing.
•
Flashing LED
OFF
:
the LED will not flash even when the
Remote Car Starter is armed (either
under active or passive arming). Nevertheless, if the Remote Car Starter enters Valet Mode, the
LED will still remain lit without flashing as long as the ignition is off.
Safe Start
If this feature is configured at installation, it will require the user press the
START/STOP
button 2
times within 3 seconds to remote-start the vehicle. This will eliminate accidental remote starts – for
example: if there are children playing with the remote control.
If
Swap Start
is configured, press
LOCK
and
UNLOCK
simultaneously to remote-start your vehicle.
Under Safe Start, you can activate Cold Weather Mode by
•
Pressing the
START/STOP
button, and then
•
Pressing and holding the
START/STOP
button again until the parking lights flash 3 times.
Starter Kill / Anti-grind feature
With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the Starter Kill is armed. If your system was installed with the Starter Kill option, one will
not be able to start your vehicle with the Key unless the system has been unlocked and disarmed
first, or put into Valet Mode.
