User Guide
P.3
Ignition Valet
The system can be placed in Valet Mode to disable the remote starting capabilities. If the vehicle
needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being
accidentally started by remote control. This feature allows the user to enter Valet Mode by using
only the Ignition key.
To ENTER Valet Mode
1.
With the key in the Ignition switch, turn the key to the
ON (RUN/IGNITION)
and then
OFF
positions 5
times within 10 seconds.
2.
The Parking Lights will flash 3 times indicating the Module is now in Valet Mode. The LED will
turn
ON
solid.
To EXIT Valet Mode
1.
With the key in the Ignition switch, turn the key to the
ON (RUN/IGNITION)
and then
OFF
positions 5
times within 10 seconds.
2.
The Parking Lights will flash twice indicating the Module is now out of Valet Mode. The LED
will turn
OFF
.
Valet Mode
(Available only if the Valet plug-in switch is installed)
To put the system i n t o Valet Mode:
1.
Turn the ignition key to the
IGNITION ON
(
RUN
) position.
2.
Within 3 sec. press and hold the valet button for approx. 1 sec. The parking lights will flash 3
times and the L.E.D. will come
ON
and remain lit.
To take the system o u t o f Valet Mode:
1.
Turn the ignition key to the
IGNITION ON
(
RUN
) position.
2.
Within 3 sec. press and hold the valet button for approx. 1 sec. The parking lights will flash 2
times and the L.E.D. will go
OUT
.
The valet button can only be used if the ignition key is in the
IGNITION ON
(
RUN
) position.
Remote Valet Mode
This feature will allow you to remotely put your system into Valet Mode by using the transmitter
instead of the Valet button as above.
Getting into Valet Mode
•
Hold the
UNLOCK
and
START/STOP
buttons simultaneously for 3 second.
•
The Parking Lights will flash 3 times.
The LED will remain on solid.
Getting out of Valet Mode
•
Hold the
UNLOCK
and
START/STOP
buttons simultaneously for 3 second.
•
The Parking Lights will flash 2 times.
The LED will turn off.
Panic Mode
Note:
This feature will be available only if the Horn was configured at installation.
In an emergency situation, you can activate Panic Mode using the
LOCK
or
UNLOCK
button. This will:
•
Shut down the engine,
•
Unlock the doors (if
UNLOCK
is pressed)
•
or lock the doors (if
LOCK
is pressed),
•
Disarm the Starter Kill and
•
Activate the horn for 30 seconds.
(See p. 5 for a description of the Starter Kill option.)
To trigger Panic Mode:
•
Press and hold the
UNLOCK
button for approximately 3 seconds until the horn starts to sound and
the parking lights flash: this will unlock the doors before the horn starts.
•
Or
press and hold the
LOCK
button for approximately 3 seconds until the horn starts to sound
and the parking lights flash: this will lock the doors before the horn starts.
