OPERATION
To fill the water tank:
Remove the nozzle from the vapour outlet vent.
Remove the water tank (by lifting the handle labelled
"humidifier") vertically upwards.
Turn the tank upside down, and unscrew the lid.
Fill the tank with cold water.
Replace the lid, making sure that it is screwed down tightly.
Replace the tank in the humidifier
Replace the nozzle on the outlet vent.
To operate:
Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead
is rated at 3 Amps or more, and that it is fully unwound.
Turn the switch to COOL or WARM depending on whether a
cool mist or a warm mist is required. Allow 15 minutes for the
appliance to reach operating temperature.
Adjust the Humidity control to set the desired level of
humidity. Turning clockwise increases the humidity.
If the "No Water" indicator lights, then fill the tank as above.
Unplug from the mains, empty the water tank and thoroughly
dry, when not in use.
Night light:
To operate the night-light, press the "NIGHT LAMP" button.
Press again to switch the light off.
Page 3