If the mains lead is damaged, it must be replaced by the
manufacturer or and authorised service centre. If the mains
plug needs to be replaced,
proceed as follows:
•
Connect the brown wire to the
terminal labelled "L".
•
Connect the blue wire to the
terminal labelled "N".
•
Make sure that the cord-grip is
positioned correctly (over the
outer sheath of the cable) and it
fully tightened.
If the plug is supplied with a 13A fuse, replace it with a 3A
fuse.
PAT TESTING.
When used in a workplace, this product must be safety-
tested yearly by a qualified electrician (PAT Tested) in order
to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a
domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified
electrician at least once every 10 years or at every change of
occupancy.
For office and retail premises, and buildings such as village
halls, the wiring must be inspected at least once every 5
years.
It is recommended that all building be fitted with smoke
alarms (it is mandatory for new buildings).
Page 5
