B
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
23
Repair and Service Manual
699327
Front Fascia and Mounting Bracket
Tool List
Qty.
Wrench, 3/8”................................................................ 1
Socket, 3/8” ................................................................. 1
Ratchet ........................................................................ 1
Pry Bar ........................................................................ 1
Torque Wrench, ft. lbs. ................................................ 1
NOTICE: It is not necessary to remove the fascia to
replace any other body components.
1.
Remove the cowl (See Cowl on page 20).
2.
Disconnect the electrical connections to the horn
(See Horn on page 83).
3.
Remove the ratchet rivets (22) securing the sides of
the fascia (25) to mounting bracket (19) (Ref Fig. 9).
4.
Remove the bolts (17) and washers (18) securing
the fascia to the frame and set the horn to the side.
5.
Remove the bolts (21) securing the mounting
bracket to the frame.
Assemble in the reverse order of removal using new
ratchet rivets. Tighten the bolts (17, 21) to the torque val-
ues below.
Fig. 9 Fascia
Seat Back
Tool List
Qty.
Wrench, 7/16” ..............................................................1
Socket, 7/16”................................................................1
Ratchet ........................................................................1
Torque Wrench, in. lbs. ................................................1
Remove the bolts (23) securing the hand grip (24) and
seat back (30) to the seat back support (26) (Ref Fig. 10).
Assemble in the reverse order of removal.
Tighten the bolts to the torque values below.
The procedure is the same for the front facing rear seat
and flip seat except that there is no hand grip.
Fig. 10 Seat Back
Item
Torque Specification
17, 21
6 - 8 ft. lbs. (8 - 11 Nm)
22
19
21
25
17
18
Front of Vehicle
Item
Torque Specification
23
45 - 55 in. lbs. (5 - 6.2 Nm)
24
23
30
26
Front of Vehicle
PRELIMINARY
