B
82
Repair and Service Manual
ELECTRICAL SYSTEM
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
699327
DC to DC Converter
Tool List
Qty.
Wrench, 7/16” .............................................................. 1
Socket, 7/16” .............................................................. 1
Ratchet ........................................................................ 1
1.
Disconnect the negative (-) battery cable using an
insulated wrench.
2.
Disconnect the electrical connectors (18) (Ref Fig.
13).
3.
Remove the lock nuts (17) securing the DC to DC
converter (30) to the fender.
Assemble in the reverse order of removal. Tighten the
nuts to the torque values below
Fig. 13 DC to DC Converter
Reverse Buzzer
Tool List
Qty.
Screwdriver, Phillips.....................................................1
Drill Bit .........................................................................1
Drill...............................................................................1
Rivet Gun.....................................................................1
1.
Disconnect the negative (-) battery cable using an
insulated wrench.
2.
Remove the control panel from the instrument panel
(See Control Panel on page 21).
3.
Disconnect the push on connections (19) (Ref Fig.
14).
4.
Drill out the rivets (21) securing the reverse buzzer
(35) to the instrument panel.
Assemble in the reverse order of removal using new riv-
ets. Make sure that the black w/green wire connects to
the negative (-) terminal of the buzzer and the gray wire
connects to the positive (+) terminal.
Fig. 14 Reverse Buzzer
Item
Torque Specification
17
50 - 55 in. lbs. (5 - 6 Nm)
30
17
18
Front of Vehicle
21
19
35
PRELIMINARY
