7
Step #13
Step #14
Step #15
Secure organizer assembly to
end plate with 1/4" hex bolt and
hex nut.
Trim cable strength member(s) even
with the edge of the cable restraint
bracket. Secure strength member(s)
and **KEVLAR
®
under clip and
tighten screw.
Secure cable sheath with hose
clamp.
PLP Tip:
Avoid contact between hose clamp and shield
connector to maintain isolation of each cable
ground.
Organizer Preparation
Step #16
Attach bonding device between the
cable and ground stud in the end
plate and ground per your accepted
company practice.
Step #18
Step #17 Properly orient brackets. Secure
adapter plate(s) to brackets.
Select adapter plate assembly
location.
Brackets
Adapter plate
**KEVLAR® is a registered trademark of the DuPont™ Company.
