background image

Page 30

For equipment technical questions, please call 1-888-866-5797.

ITEM 62214 

        

SAFETY

SETUP

O

PERA

TION

M

AINTENANCE

Warranties

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, 

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the 

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, 

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper 

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries 

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of 

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.  

Proof of purchase date and an explanation of the complaint must accompany the merchandise.  

If our inspection verifies the defect, we will either repair or replace the product at our election or  

we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement.  

We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Emissions Control System Warranty

Harbor Freight Tools (HFT) is pleased to explain the emissions control system warranty on your Small Off-Road 

Engine produced after January 1, 2015 (engine), in addition to the Retail Warranty above. HFT warrants that the emissions 

control system on your engine is designed, built, and equipped so that it conforms to the United States Environmental 

Protections Agency’s (EPA) emissions requirements in effect at the time of manufacture, as well as California’s more 

stringent anti-smog standards.  HFT also warrants that the emissions control system on your engine will be free from 

defects in material and workmanship for two (2) years, provided there has been no improper maintenance, misuse, 

or abuse of your engine.

Your emissions control system may include parts such as the carburetor or fuel-injection system, and the ignition 

system. Also included may be hoses, belts, connectors and other emissions-related assemblies.

WHAT WE WILL DO

Where a warrantable condition exists, HFT will repair or replace, at our option, any emissions-related part on 

your engine if it becomes defective, malfunctions, or otherwise fails to conform with this warranty under normal use 

and service during the two (2) year term of this warranty at no cost to you, including diagnosis, parts and labor.  This 

warranty applies to the original purchaser and any subsequent owner within the two year warranty period.

Summary of Contents for 62214

































Reviews: