Page 14
For equipment technical questions, please call 1-888-866-5797.
ITEM 62214
SAFETY
SETUP
O
PERA
TION
M
AINTENANCE
5. Allow the Engine to run for several seconds.
Then, if the Choke lever is in the START position,
move the Choke Lever very slowly to its RUN position.
Note:
Moving the Choke Lever too
fast could stall the engine.
Break-in Period:
a. Breaking-in the engine will help to ensure proper equipment and engine operation.
b. The operational break-in period will last about 3 hours of use. During this period:
• Do not apply a heavy load to the equipment.
• Do not operate the engine at its maximum speed.
c. The maintenance break-in period will last about 20 hours of use.
• Change the engine oil after this period.
Under normal operating conditions subsequent maintenance follows
the schedule explained in the MAINTENANCE section.
5
Starting the Engine (continued)
