Page 8
For technical questions, please call 1-888-866-5797.
ITEM 61594
SAFETY
OpERA
TION
MAINTENANCE
SETUp
5.
Beam Assembly:
a. Place Beam (21) assembly on top of
the Fluid Tank and Tow Bar.
b. Line up the bracket underneath the
Beam with the tube at the top of the
Fluid Tank, and insert the Hinge Pin (41).
Secure the Hinge Pin with the R-Pin (23).
c. Secure the brackets at the front of
the Tow Bar together using Bolts (11),
Washers (3), and Lock Nuts (4).
d. Attach the O-Ring (34) and Hose (35) marked
“Fluid Tank” to the threaded connector at the top
of the Fluid Tank. Wrench-tighten it securely.
6.
Engine and pump Assembly:
a. Attach Engine Connecting Plate (58) to the pedestal
on the back of the Fluid Tank using Bolts (66),
Lock Washers (28), and Lock Nuts (61).
b. Slide a Hose Clamp (57) over the Return Hose (56).
c. Slip the Return Hose over the Fluid Connector (17).
d. Slide the Hose Clamp over the connection,
and tighten its screw to secure it in place.
e. Attach an O-Ring (34) to the Connector (72)
on the Hydraulic Pump (59). Connect the
unconnected Hose (38) marked “Pump” from
the Control Valve (32) to the Connector on the
Hydraulic Pump. Wrench-tighten it securely.
7. Insert the Log Cradles (73) into the brackets
on the sides of the Beam (21) angled outward.
Secure them in place with a Cotter Pin (45).
Bend the Cotter Pins back to secure them in place.
Assembly Step 5: Attach Beam Assembly
Bolt (11)
Washer (3)
Lock
Nut (4)
Beam (21)
asm.
R-pin (23)
Hinge
pin (41)
O-Ring
(34)
Hose
(35)
Fluid
Tank
Tow Bar
Assembly Step 6: Attach Engine and pump
Bolt (66)
Return
Hose (56)
Lock Nut (61)
and
Lock Washer (28)
Engine
Connecting
plate (58)
Connector (72)
O-Ring (34)
Fluid
Connector
(17)
Assembly Step 7: Attach Log Cradles
Log
Cradles (73)
Cotter
pin (45)
Cotter
pin (45)
Beam (21)
