Page 3
For technical questions, please call 1-888-866-5797.
ITEM 61594
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Symbol Definitions
Symbol
property or Statement
RpM
Revolutions Per Minute
Hp
Horsepower
Read the manual before
set-up and/or use.
WARNING marking concerning
Risk of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
WARNING marking concerning Risk of
Facial Injury from flying debris. Wear
ANSI-approved full face shield.
WARNING marking concerning
Risk of Hearing Loss.
Wear hearing protection.
WARNING marking concerning Risk of
Foot Injury. Wear steel-toe work boots.
Symbol
property or Statement
WARNING marking concerning
Risk of Hand Injury. Wear
heavy-duty work gloves.
WARNING marking concerning
Crushing Hazard. Keep hands and
feet away from moving parts.
WARNING marking concerning
Risk of Respiratory Injury.
Operate engine OUTSIDE and far away
from windows, doors, and vents.
WARNING marking concerning
Risk of Fire while handling fuel.
Do not smoke while handling fuel.
WARNING marking concerning
Risk of Fire.
Do not refuel while operating.
Keep flammable objects
away from engine.
IMpORTANT SAFETY INSTRUCTIONS
WARNING! Read all instructions.
Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH.
The warnings and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
