Precor TRM 811.v2, Service Manual

Page: 17 / 114

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 17
SET COOL DOWN TIME Sets the amount of time that a cool down period will occur at the end of
every workout. Factory default is 5 minutes. Settable in 1 minute
increments.
SET METRICS DEFAULT Sets a metric that may be of specific importance to the specific facility or
fitness trainer. The selected metric will scroll across the screen at regular
intervals during the workout.
Factory default is "NONE".
SET SPEED LIMIT
Sets the maximum speed the user can set the unit to.
Factory default is 12 MPH.
SET INCLINE LIMIT
Sets the maximum value the user can set the unit to.
Factory default is 15%.
HIDDEN PROGRAMS
Either enabled or disabled, the setting allows the unit to access specialized
fitness tests designed for police, fire fighters and the military.
Factory default is disabled.
REMOTE SPEED CONTROL
Not currently used or supported in software.
AUTOSTOP CONFIGURE
Sets the Auto Stop setting to On or Off. Factory default is “ON”
SET CUSTOM PROGRAM 1 Intended for a custom program to be programmed if the tread is used in a
residential setting.
SET CUSTOM PROGRAM 2 Intended for a custom program to be programmed if the tread is used in a
residential setting.
Information Display (65)
Information Display Access: press STOP/PAUSE/REST > 6,5
ITEM
DESCRIPTION
ODOMETER
Displays the total number of accumulated miles on the unit.
This value is stored in the upper PCA in the console so if the
PCA is replaced the accumulated miles would start again from "0".
HOUR METER
Displays the total number of hours that the unit took to accumulate unit miles.
This value is stored in the upper PCA in the console so if that PCA is replaced the
hours of use would start again from "0".
BELT RATING
Displays a belt rating from 10 (best) to 0 (worst). Resettable to 10 by holding
QuickStart.
U-BOOT SW Displays the current version of boot-up software for the upper PCA (console).
U-BASE SW
Displays the current version of software loaded in the upper PCA (console).
This is the unit specific console software.
LOWER SW
Displays the current version of software loaded in the Machine Controller.