Precor TRM 811.v2, Service Manual

Page: 95 / 114

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 95
Daily Task Instruction
Clean the LED/LCD/LCD consoles. Clean the LED electronic console with damp lint free cloth
using water or approved cleaner. Dry completely. On LCD,
Touch-screen, or PVS consoles, clean the display with a
damp lint free cloth using ONLY a diluted solution of one
part 91% Isopropyl Alcohol to one part water.
Clean the running belt top surface. Clean the top surface of the running belt with a soft dry or
damp cloth using an approved cleaner.
Clean the running belt and deck. Clean the running belt and deck.
Check for the following possible
issues:

Slipping belts

Loose fasteners

Unusual noises

Worn or frayed power cords

Worn, damaged, missing
safety lanyards or clips
Verify that none of the following issues are occurring:

Slipping belts

Loose fasteners

Unusual noises

Worn or frayed power cords

Worn, damaged, missing safety lanyards or clips
Visually inspect the running belt
condition and alignment/tracking. Make sure that the running belt is not frayed/worn and that
the belt alignment and tracking is centered on the deck and
rollers.
Weekly
Perform the following maintenance tasks every week:
Weekly Task Instruction
Verify unit sits level and solid on floor
1
. Use bubble level placed on running belt to verify level.
All feet should be touching the floor and the unit
should not rock or wobble when in use.
Perform the following items at maximum Incline, power switch OFF, and cord disconnected: Raise
Incline to maximum level, then Switch the input power (circuit breaker) to OFF and unplug the
power cord.
Verify that the power cord is not damaged
or laying underneath the treadmill
1
.
Verify that the power cord is not damaged, pinched,
coiled, or positioned under the treadmill.