Precor TRM 211 Quick Start Card Download

Page: 36 / 79

Workout Options

If you choose to exercise with no set time limit, you

must manually end a program by pressing the red

STOP key. You can also press the SPEED down arrow

until the speed is reduced to zero and the running belt

stops.
To stop the running belt or end an exercise session at

any time, do the following:
1.

Grasp a handrail with one hand.

Press the red STOP key with your other hand. The

treadmill enters pause mode.

Press the red STOP key again to view the workout

summary.

Press the red STOP key a third time to return to the

banner.

Important:

Always turn Off and unplug the treadmill

when it is not in use. Never leave children unsupervised

around the treadmill.

303207-110 rev A TRM 211 Owner's Manual 031914 EN-US - body only with crops.pdf 31

3/25/2014 12:55:22 PM

Summary of Contents for TRM 211
















































































Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands

Precor TRM 211, Quick Start Card

Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands