Precor TRM 211 Quick Start Card Download Page 12

Page: 12 / 79

Important Safety Instructions

Regulatory Notices for

Cardiovascular Exercise

Equipment

The regulatory information in this section applies to

the exercise equipment and its control console.

Safety Approvals for Cardiovascular
Equipment

Precor equipment has been tested and found to

comply with the following applicable safety standards.

Cardiovascular Type Equipment:

CAN/CSA, IEC 60335-1 (Household and similar

electrical appliances - Safety)

Radio Frequency Interference (RFI)

Federal Communications Commission,
Part 15

The treadmill has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. The treadmill

generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the owner’s manual instructions, may cause

harmful interference to radio communications.

WARNING

Per FCC rules, changes or modifications

not expressly approved by Precor could

void the user’s authority to operate the

equipment.

303207-110 rev A TRM 211 Owner's Manual 031914 EN-US - body only with crops.pdf 7

3/25/2014 12:55:21 PM

Summary of Contents for TRM 211
















































































Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands

Precor TRM 211, Quick Start Card

Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands