Precor TRM 211 Quick Start Card Download Page 33

Page: 33 / 79

TRM 211 Owner's Manual

Selecting a Program

While the banner prompt scrolls, continually press

the PROGRAMS key to review the list of programs

(refer to

Programs

ENTER TIME appears in the display and the Guest

bar is highlighted which indicates that your

preferences in workout time, weight, and age will

not be saved to memory. Use the arrow keys to

select a program time between 0 and 90 minutes.

Accept the displayed entry by pressing ENTER.
Each column in the program’s profile represents

one minute.

Continue through the setup phase and enter your

weight (23—350 lbs/10—159 kg) and then your

age (10—99).

Note:

To change a value (program, weight, or age)

that you have already entered press STOP/HOLD

TO RESET or wait 30 seconds to return to the

banner. Select a program and reenter the

appropriate values.

Hold onto a handrail and straddle the running belt.
BELT STARTING scrolls across the display. A

3-second countdown appears, and then the

running belt starts moving.

Step on to the running belt with the speed at or

below 1 mph or 1 kph and begin exercising. Use the

SPEED arrow keys to increase or decrease the

speed of the running belt.

Important:

As a GUEST user, you can press

QUICKSTART at any of the setup prompts: ENTER

TIME, ENTER WEIGHT, or ENTER AGE. Default

settings are applied to any prompts you skipped and

the running belt starts moving after a 3-second

countdown.

303207-110 rev A TRM 211 Owner's Manual 031914 EN-US - body only with crops.pdf 28

3/25/2014 12:55:22 PM

Summary of Contents for TRM 211
















































































Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands

Precor TRM 211, Quick Start Card

Search results

Summary of Contents for TRM 211

Reviews:

Related manuals for TRM 211

Brands by name

Popular brands