©2019 Precor Inc. | Seated Leg Curl RSL 619 | Assembly Guide
10
4
1 roller pad cap ring
1 roller pad
Snap roller pad cap ring onto roller pad.
5
1 retaining ring, 38 mm
1 roller pad cap
Tool: Retaining ring pliers
Slide roller pad with cap ring onto shaft on pivot arm . Secure pad
with retaining ring and snap on roller cap.
10
35
8
47
11
10
11
35
47
8
Route the Cable
Image
Hardware
Instructions
2
Tool: Hex wrench, 8 mm
Hex wrench, 4 mm
To route the cable around the lower pulley on the weight stack tower,
remove the cable retainer. Route the cable around the pulley and then
replace the cable retainer.
3
Tools: Hex wrench, 8 mm
Open-end wrench, 19 mm
Torque wrench
To route the cable to the upper pulleys of weight stack tower, remove the
cable retainers, route the cables, and replace the retainers.
Tighten to 50
ft-lb (67 N-m) of torque.
