Precor EFX EFX 821, Assembling And Maintaining Manual

Page: 25 / 48

Assembling the EFX
23
Attaching the Caps and Upright Support Cover
You will need the arm caps and foot covers to complete the
following tasks.
To attach the caps and upright support covers:
1. Align the cut-out inside the link arm cap with the link arm
mounting hole. Apply pressure to the cap until it snaps
into place.
Figure 11: Attaching the link and pivot arm caps
2. Attach the pivot arm caps.
Figure 12: Attaching the upright support covers
3. Place one inner and one outer upright support cover
around an upright support. Align each pair so the arrows
on the covers point toward the front of the unit. Apply
pressure to engage the inner cover protrusions with the
outer cover screw holes.