Precor EFX EFX 821, Assembling And Maintaining Manual

Page: 21 / 48

Assembling the EFX
19
3. Fasten the display console mount to each upright support
by threading a buttonhead screw, washer, and split
washer through opposite mounting holes. Check that the
base fasteners are loose before installing the display
console fasteners.
CAUTION: Make sure the display console mount screws are
properly threaded into the inserts. Do not cross thread. The
Precor Limited Warranty does not cover damage that occurs
during installation.
Figure 6: Attaching the side bolts
4. Check alignments and thread the remaining four display
console mount screws, four washers, and four split
washers. Wrench tighten with a
³⁄₁₆
-inch hex key so the
assemblies come together, but leave room for
adjustments.
5. When all fasteners are snug against the unit, begin at the
base and alternately wrench tighten all fasteners. Follow
the sequence from step 2 through step 5.