Precor EFX EFX 821, Assembling And Maintaining Manual

Page: 6 / 48

4
Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer

Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.

Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.

Care should be taken when mounting or dismounting the
equipment.

Read, understand, and test the emergency stop
procedures before use.

Keep the power cord or optional power adapter and plug
away from heated surfaces.

Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.

Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.

Assemble and operate the equipment on a solid, level
surface.

Locate equipment at least 40 inches (1 meter) away from
walls or furniture on either side of the equipment, and 40
inches (1 meter) away from objects behind the
equipment. These standards should also be used when
positioning equipment away from sources of heat, such as
radiators, heat registers, and stoves. Avoid temperature
extremes.

Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.

Do not operate electrically powered equipment in damp
or wet locations.

Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.