Precor EFX 576i, Owner'S Manual

Page: 40 / 112

Product Owner's Manual: Maintenance 38
Recumbent Bike: Realigning the Seat
If the seat rocks side-to-side, you need to realign the center wheel
underneath the seat. Adjustment screws are located on the left
side of the seat rail.
To remove seat wobble (side-to-side movement), take the following
steps.
1. Obtain a
³⁄₁₆
-inch and
⁵⁄₁₆
2. Use the
-inch hex key.
³⁄₁₆
-inch hex key to loosen the two adjustment screws
as shown in the following figure.
Figure 8: Loosening the two adjustment screws
3. Use the
⁵⁄₁₆
-inch hex key to turn the wheel lock adjustment key
clockwise ¼ turn as shown in the following figure. This process
realigns the center wheel inside the top rail. Leave the
⁵⁄₁₆
-inch
hex key in place while you tighten the adjustment screws with
the
³⁄₁₆
-inch hex key.
Figure 9: Realigning the center wheel
4. Remove the hex keys and check that the seat no longer rocks
side-to-side. If the rocking movement continues, you need to
repeat steps 2 and 3.