9.17, 917si Treadmill
Page 27
10. Center the running belt on the running bed, be sure that the running belt is centered
between the belt trackers. Using two running belt tension gauges, tension the running belt to
0.3%
11. Snap the trim strips onto the side rails and slide them back under the end caps. The
Timmerman clips (hood mounting clips) must be fully visible with at least a 1/4” of clearance
on all sides.
12. Replace the hood.
13. Check the running belt tracking per Procedure 4.3.
14. Check treadmill operation per procedure 3.
