917, 917si Treadmillr
Page 32
Procedure 6.4 - Replacing the Lift Platform
1.
Set the circuit breaker in the “off” position and remove the AC line cord from the AC outlet.
2.
Lay the treadmill on it’s side.
3.
The lift platform snaps onto the frame and the lift platform axle.
Diagram 6.4 - Lift Platform
4.
Do not allow the lift motor tube to rotate during this procedure. If the lift motor tube is
allowed to rotate, the lift motor must be re-calibrated per Procedure 4.1 or 4.2.
5.
Unsnap the lift platform from the frame and the lift platform axle.
6.
Arrange the wheels on the lift platform axle so that they are aligned with the wheel slots in
the replacement lift platform and snap the replacement lift platform onto the lift platform axle.
7.
Snap the lift platform onto the frame.
8.
Set the treadmill in an upright position, and test the treadmill per Section 3.
Lift Platform
Wheel
Lift Motor Tube
Lift Platform Axle
