9.17, 917si Treadmill
Page 33
Procedure 6.5 - Replacing the Lift Motor
1.
Set the circuit breaker in the “off” position and remove the AC line cord from the AC outlet.
2.
Remove the lower front cover.
3.
Lay the treadmill on it’s side. Remove the shield from the lower PCA.
Diagram 6.5 - 917, Bottom View
4.
Remove the lift connector (J7) from the lower PCA. Remove the cable ties securing the lift
motor cable and feed the lift motor cable back toward the lift motor. Remove the lift motor
ground wire.
5.
Unsnap the lift platform axle from the lift platform. Remove the lift platform axle and wheels
from the lift motor.
6.
The lift motor is fastened to the treadmill by a clevis pin. Remove the hitch pin from the
clevis pin. Remove the clevis pin from the lift motor.
