Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
3
GENERAL
This product is a Safety Class 3 instrument. The protective features of this product may be impaired if it
is used in a manner not specified in the user manual.
Environmental Conditions
The TP-P6 is designed to operate at a maximum relative humidity of 95% and at altitudes of up to 2,000
meters. For more information, please refer to the Specifications section.
Before Applying Power
Verify that the product is set to match the available line voltage, the correct fuse is installed, and all
safety precautions are taken. Note: The PRO TP-P6’s external markings are described under Symbols.
Do Not Operate in an Explosive Atmosphere
Do not operate the PRO TP-P6 in the presence of flammable gases or fumes.
Do Not Remove PRO TP-P6 Cover
Operating personnel must not remove test equipment covers. Component replacement and internal
adjustments must be made only by qualified service personnel.
Any test equipment that appears damaged or defective should be made inoperative and secured against
unintended operation until they can be repaired by qualified service personnel.
Safety Terms Used in This Manual
Warning!!
Denotes a hazard. It calls attention to a procedure which, if not correctly performed or adhered to, could
result in personnel injury. Do not proceed beyond a Warning!! sign until the indicated conditions are fully
understood and met.
Caution
Denotes a hazard. It calls attention to an operating procedure which, if not correctly performed or
adhered to, could result in damage to or destruction of part or the entire product. Do not proceed beyond
a CAUTION sign until the indicated conditions are fully understood and met.
Note:
Denotes information that may be beneficial during the use and maintenance of the PRO TP-P6.