Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
16
Note:
The amount of connectors depends on the specific module configuration. Not all modules are equipped
with all ports.
Warning!!
Remember that the PRO TP-P6 is a laser instrument. Users should avoid looking directly into the optical
output. The use of a fiber scope or magnifier should also be avoided. The use of such devices can focus a
highly intense beam onto the retina, which may result in permanent eye damage.
Caution
Laser Radiation:
To avoid serious eye injury, never look directly into the optical outputs of fiber optic
network equipment, test equipment, patch cords, or test jumpers.
●
Always avoid looking directly into the optical output port, when PRO TP-P6 is operational.
●
Always replace protective dust cap on the detector port when PRO TP-P6 is not being used.
●
Always avoid looking directly at unconnected end of optical fiber in testing and make the
unconnected end pointing at a non-reflective object if available.
Optical Ports
The PRO TP-P6 is equipment with FC/PC connectors (Interchangeable SC, ST)
1 General Information