© 2020 Precision Lighting Ltd. We reserve the right to change details of design, materials and finish. Version 11.20
4. Changing beam angle
4A)Changing the microlens
NOTE
Only applies to Solo 11 & 16 series
Follow step 2 to remove the snoot.
Unscrew the mircolens cap anti-clockwise
until fully detached.
Remove the microlens and replace with
alternative microlens ensuring it is installed
flat.
NOTE
Ensure the microlens is inserted
with smooth side / text facing outwards,
and text is legible.
Reattach microlens cap, screw clockwise
until it stops and is tight and secure.
Reattach snoot, screw on clockwise until it
stops and is secure.
4B)Changing the optic
NOTE
Only applies to Solo 16 Plus series
Follow step 2 to remove the snoot.
Unscrew the Optic cap anti-clockwise until
fully detached.
Gently quarter turn the optic anti-
clockwise and remove.
NOTE
Do not touch the exposed LED
Carefully place optic on to LED and gently
quarter turn clockwise to lock it into place.
Reattach Optic Cap, screw on clockwise
until it stops and is secure.
Reattach Snoot, screw on clockwise until it
stops and is secure.
4A).
4B).
