www.bia.lighting | [email protected]
page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA
©
2020
V
11.20
WARRANTY STATEMENT
This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit
www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
PRODUCT VARIANTS
Power :
6W
12W
18W
24W
Dimmable
CCT :
3000K No
4000K No
6000K No
RGB PWM
Beam Angle:
10°
20°
40°
60°
PRODUCT SPECIFICATIONS
Input Voltage
: 24V DC
Operating Temperature : -10 to 40°C
Material
: Aluminium
MAGNUM
FLOOD LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
PARTS INCLUDED
LED
Luminaire
IP
67
30m Cables
ADDITIONAL INFORMATION
1. Luminaire angle is adjustable. Refer instructions overleaf.
2. Ensure all drivers, cables and joins are sufficient and installed to
the required IP rating.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire.
These damages may result in corrosion.
IK
10
SOLD SEPARATELY
Driver
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modified, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
x1
x1
