PD6700-0L1 Field-Mount Loop-Powered Process Meter
Instruction Manual
2
Disclaimer
The information contained in this document is
subject to change without notice. Precision
Digital Corporation makes no representations
or warranties with respect to the contents hereof;
and specifically disclaims any implied warranties
of merchantability or fitness for a particular
purpose.
•
Read complete instructions prior to installation
and operation of the meter.
•
Risk of electric shock or personal injury.
•
This product is not recommended for life support
applications or applications where malfunctioning
could result in personal injury or property loss.
Anyone using this product for such applications
does so at his/her own risk. Precision Digital
Corporation shall not be held liable for damages
resulting from such improper use.
•
Failure to follow installation guidelines could
result in death or serious injury. Make sure only
qualified personnel perform the installation.
WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Limited Warranty
Precision Digital Corporation warrants this
product against defects in material or
workmanship for the specified period under
“Specifications” from the date of shipment from
the factory. Precision Digital’s liability under this
limited warranty shall not exceed the purchase
value, repair, or replacement of the defective unit.
See Warranty Information and Terms &
Conditions on
www.predig.com
for complete
details.
© 2020 Precision Digital Corporation.
All rights reserved.
Introduction
The PD6700-0L1 is a rugged, field-mount,
loop-powered meter fully featured for demanding
applications in harsh environmental conditions. The
bargraph representation of the process input is
perfect for level applications and allows for quick
assessment of current conditions. The meter derives
all its power from the 4-20 mA loop. It is programmed
using the four SafeTouch through-window buttons,
without removing the cover, and can be scaled with or
without a calibration signal. The numeric display will
read up to 99999 and the alphanumeric display can
be programmed to show any combination of numbers
and letters up to seven characters long for use as
engineering units, the process identification tag or a
display for the calculated volume when using for level
applications. The backlight lets you see the display
under any lighting condition and can be powered from
either the 4-20 mA loop or from a separate DC power
supply.
The enclosure is provided with three threaded conduit
holes and integrated pipe or wall mounting slotted
flanges.
Ordering Information
Model
Description
PD6700-0L1
Field-Mount Loop-Powered Process
Meter with Bargraph
Accessories
Model
Description
PDAPLUG75P
3/4" NPT Plastic Conduit Plug
PDA1024-01
24 VDC Power Supply for DIN Rail
PDA6846
Steel 2" U-Bolt Kit. All Material: Zinc
Plated Steel; (1) U-Bolt for 2" Pipe
with (2 each) Washers, Lock
Washers, and Nuts.
PDA6846-SS
Stainless Steel 2" U-Bolt Kit. All
Material: Stainless Steel; (1) U-Bolt
for 2" Pipe with (2 each) Washers,
Lock Washers, and Nuts.
PDA-SSTAG
Custom Stainless Steel Tag (see
website for convenient ordering
form)
