Large Display Temperature Meters
Instruction Manual
52
Parts Supplied with Panel Mounting Kit
:
1. Two angle brackets
2. One
self-adhesive decorative bezel
3. Eight #12-24 x ¾" screws
4. Eight #12 lock washers
5. Eight #12-24 hex nuts
6. Four #12 flat washers
Panel Mounting Assembly Instructions:
1. Drill four holes in panel and make panel cutout as shown. Tolerance for all
dimensions is
±
0.01" (0.25 mm).
2. Secure the two side mounting brackets to the meter base using the supplied
hardware.
3. Mount this assembly to the rear of the panel using supplied hardware.
4. Secure the meter cover to the base.
5. Attach decorative bezel to the panel.
Notes:
1. Allowable panel thickness: 0.06" – 0.25" (1.5 mm x 6.4 mm). Longer bracket
screws may be used for panel thickness up to 0.5" (12.7 mm).
2. Mounting space required: 7" x 17.5" x 4" (178 mm x 445 mm x102 mm)
(H x W x D). Meter cover extends 0.8" (20 mm) - X from the surface of the
panel, where X equals the thickness of the panel.
3. This panel mounting kit is not intended to provide waterproof protection to
the panel.
4. All dimensions are in inches and millimeters ( ).
