PD6701 Field-Mount Loop-Powered Feet & Inches Level Meter
Instruction Manual
2
Disclaimer
The information contained in this document
is subject to change without notice. Precision
Digital Corporation makes no representations
or warranties with respect to the contents hereof;
and specifically disclaims any implied warranties
of merchantability or fitness for a particular
purpose.
•
Read complete instructions prior to installation
and operation of the meter.
•
Risk of electric shock or personal injury.
•
This product is not recommended for life support
applications or applications where malfunctioning
could result in personal injury or property loss.
Anyone using this product for such applications
does so at his/her own risk. Precision Digital
Corporation shall not be held liable for damages
resulting from such improper use.
•
Failure to follow installation guidelines could
result in death or serious injury. Make sure only
qualified personnel perform the installation.
WARNING
Cancer and Reproductive Harm -
Limited Warranty
Precision Digital Corporation warrants this
product against defects in material or
workmanship for the specified period under
“Specifications” from the date of shipment from
the factory. Precision Digital’s liability under this
limited warranty shall not exceed the purchase
value, repair, or replacement of the defective unit.
See Warranty Information and Terms &
Conditions on
details.
© 2020 Precision Digital Corporation.
All rights reserved.
Introduction
The PD6701 is a rugged, field-mount, loop-powered
indicator specifically designed for level applications in
harsh environmental conditions. The meter displays
level in easy to read and understand feet, inches, and
fractions of an inch; and a 20-segment tank level
indicator. The lower display can show a custom unit
or tag, percent full, or a second scale for the 4-20 mA
input used to indicate volume.
The meter derives all of its power from the 4-20 mA
loop. It is programmed using the four SafeTouch
through-window buttons, without removing the cover,
and can be scaled with or without a calibration signal.
The upper display will read up to 699 ft.
– 11
15
/
16
inches. The alphanumeric volume/tag display will read
up to 9,999,999. The alphanumeric display can also
be programmed to show any combination of numbers
and letters up to seven characters long for use as
engineering units and/or the process identification tag.
The backlight lets you see the display under any
lighting condition and can be powered from either the
4-20 mA loop or from a separate DC power supply.
The enclosure is provided with three threaded conduit
holes and integrated pipe or wall mounting slotted
flanges.
Ordering Information
Model
Description
PD6701-0K1
Explosion-Proof Loop-Powered
Feet & Inches Level Meter with
backlight
Accessories
Model
Description
3/4" NPT Plastic Conduit Plug
24 VDC Power Supply for DIN Rail
Steel 2" U-Bolt Kit. All Material: Zinc
Plated Steel; (1) U-Bolt for 2" Pipe with
(2 each) Washers, Lock Washers, and
Nuts.
Stainless Steel 2" U-Bolt Kit. All
Material: Stainless Steel; (1) U-Bolt for
2" Pipe with (2 each) Washers, Lock
Washers, and Nuts.
Custom Stainless Steel Tag (see
website for convenient ordering form)
